i have ipv6 disabled via
reg add HKLM\sYSTEM\currentControlSet\Services\Tcpip6\Parameters /v DisabledComponents /t REG_DWORD /d 0xFF /f
the network card for my lan has ipv6 disabled.
if i do an ipconfig, no ipv6 addresses are listed.
----------------------------
Ethernet adapter BUILTIN.WIRED:
Connection-specific DNS Suffix . : localdomain
IPv4 Address. . . . . . . . . . . : 192.168.62.234
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.62.1
Unknown adapter VPN.V.MV.US.ALL.HOME:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 10.10.0.7
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 10.10.0.1
--------------------------------
here the the log output
---------------
Feb 01 10:42:02 AM: State changed to Connecting
Feb 01 10:42:02 AM: Viscosity Windows 1.9 (1695)
Feb 01 10:42:02 AM: Running on Windows 10 2009 (19042) 64 bit
Feb 01 10:42:02 AM: Running on .NET Framework Version 4.8.04084.528372
Feb 01 10:42:02 AM: WARNING: The block-outside-dns option has been ignored as it is not required under Viscosity's DNS management system. For more information please see the following article:
https://www.sparklabs.com/support/kb/ar ... n-ignored/
Feb 01 10:42:02 AM: Checking reachability status of connection...
Feb 01 10:42:02 AM: Connection is reachable. Starting connection attempt.
Feb 01 10:42:02 AM: Bringing up interface...
Feb 01 10:42:02 AM: OpenVPN 2.4.9 Windows-MSVC [SSL (OpenSSL)] [LZO] [LZ4] [AEAD] built on Oct 6 2020
Feb 01 10:42:02 AM: library versions: OpenSSL 1.1.1h 22 Sep 2020, LZO 2.10
Feb 01 10:42:05 AM: Valid endpoint found: 86.106.121.15
udp
Feb 01 10:42:05 AM: TCP/UDP: Preserving recently used remote address: [AF_INET]86.106.121.15:1196
Feb 01 10:42:05 AM: Socket Buffers: R=[65536->524288] S=[65536->524288]
Feb 01 10:42:05 AM: UDP link local: (not bound)
Feb 01 10:42:05 AM: UDP link remote: [AF_INET]86.106.121.15:1196
Feb 01 10:42:05 AM: State changed to Authenticating
Feb 01 10:42:05 AM: TLS: Initial packet from [AF_INET]86.106.121.15:1196, sid=706bb1e0 1a1fc480
Feb 01 10:42:05 AM: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Feb 01 10:42:05 AM: VERIFY OK: depth=1, C=SE, ST=Gotaland, O=Amagicom AB, OU=Mullvad, CN=Mullvad Intermediate CA v3, emailAddress=
[email protected]
Feb 01 10:42:05 AM: VERIFY KU OK
Feb 01 10:42:05 AM: Validating certificate extended key usage
Feb 01 10:42:05 AM: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Feb 01 10:42:05 AM: VERIFY EKU OK
Feb 01 10:42:05 AM: VERIFY OK: depth=0, C=SE, ST=Gotaland, O=Amagicom AB, OU=Mullvad, CN=us-nyc-211.mullvad.net, emailAddress=
[email protected]
Feb 01 10:42:05 AM: WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1557', remote='link-mtu 1558'
Feb 01 10:42:05 AM: WARNING: 'comp-lzo' is present in remote config but missing in local config, remote='comp-lzo'
Feb 01 10:42:05 AM: Control Channel: TLSv1.3, cipher TLSv1.3 TLS_CHACHA20_POLY1305_SHA256, 4096 bit RSA
Feb 01 10:42:05 AM: [us-nyc-211.mullvad.net] Peer Connection Initiated with [AF_INET]86.106.121.15:1196
Feb 01 10:42:05 AM: State changed to Connecting
Feb 01 10:42:05 AM: SENT CONTROL [us-nyc-211.mullvad.net]: 'PUSH_REQUEST' (status=1)
Feb 01 10:42:06 AM: SENT CONTROL [us-nyc-211.mullvad.net]: 'PUSH_REQUEST' (status=1)
Feb 01 10:42:07 AM: SENT CONTROL [us-nyc-211.mullvad.net]: 'PUSH_REQUEST' (status=1)
Feb 01 10:42:07 AM: PUSH: Received control message: 'PUSH_REPLY,dhcp-option DNS 10.10.0.1,redirect-gateway def1 bypass-dhcp,route-ipv6 0000::/2,route-ipv6 4000::/2,route-ipv6 8000::/2,route-ipv6 C000::/2,comp-lzo no,route-gateway 10.10.0.1,topology subnet,socket-flags TCP_NODELAY,ifconfig-ipv6 fdda:d0d0:cafe
:1005/64 fdda:d0d0:cafe
:,ifconfig 10.10.0.7 255.255.0.0,peer-id 5,cipher AES-256-GCM'
Feb 01 10:42:07 AM: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Feb 01 10:42:07 AM: Options error: option 'redirect-gateway' cannot be used in this context ([PUSH-OPTIONS])
Feb 01 10:42:07 AM: Options error: option 'route-ipv6' cannot be used in this context ([PUSH-OPTIONS])
Feb 01 10:42:07 AM: Options error: option 'route-ipv6' cannot be used in this context ([PUSH-OPTIONS])
Feb 01 10:42:07 AM: Options error: option 'route-ipv6' cannot be used in this context ([PUSH-OPTIONS])
Feb 01 10:42:07 AM: Options error: option 'route-ipv6' cannot be used in this context ([PUSH-OPTIONS])
Feb 01 10:42:07 AM: OPTIONS IMPORT: compression parms modified
Feb 01 10:42:07 AM: OPTIONS IMPORT: --socket-flags option modified
Feb 01 10:42:07 AM: NOTE: setsockopt TCP_NODELAY=1 failed
Feb 01 10:42:07 AM: OPTIONS IMPORT: --ifconfig/up options modified
Feb 01 10:42:07 AM: OPTIONS IMPORT: route-related options modified
Feb 01 10:42:07 AM: OPTIONS IMPORT: peer-id set
Feb 01 10:42:07 AM: OPTIONS IMPORT: adjusting link_mtu to 1624
Feb 01 10:42:07 AM: OPTIONS IMPORT: data channel crypto options modified
Feb 01 10:42:07 AM: Data Channel: using negotiated cipher 'AES-256-GCM'
Feb 01 10:42:07 AM: Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
Feb 01 10:42:07 AM: Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
Feb 01 10:42:07 AM: interactive service msg_channel=0
Feb 01 10:42:07 AM: ROUTE_GATEWAY 192.168.62.1/255.255.255.0 I=13 HWADDR=48:2a:e3:2e:f6:d1
Feb 01 10:42:07 AM: Awaiting adapter to come up...
Feb 01 10:42:07 AM: WARNING: Failed to get IPv6 interface information for MTU. This warning can be ignored if this stack is disabled. Element not found
Feb 01 10:42:08 AM: TAP-WIN32 device [VPN.V.MV.US.ALL.HOME] opened: \\?\root#net#0001#{adda4c48-c32e-4ef6-9602-b3252f082583}, index: 17
Feb 01 10:42:08 AM: Waiting for DNS Setup to complete...
Feb 01 10:42:09 AM: Successful ARP Flush on interface [17] {8374414A-4AA0-4FFF-A967-D1AC5BE02432}
Feb 01 10:42:09 AM: add_route_ipv6(fdda:d0d0:cafe
:/64 -> fdda:d0d0:cafe
:1005 metric 0) dev VPN.V.MV.US.ALL.HOME
Feb 01 10:42:09 AM: Route addition via IPAPI failed. Fallback to netsh.exe
Feb 01 10:42:09 AM: ROUTE: IPv6 route addition failed using management: Element not found. [status=1168 if_index=17]
Feb 01 10:42:09 AM: TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up
Feb 01 10:42:09 AM: C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.0.0 10.10.0.1
Feb 01 10:42:09 AM: IPv4 Route addition via management succeeded
Feb 01 10:42:09 AM: Initialization Sequence Completed
Feb 01 10:42:09 AM: WARNING: Split DNS is being used however no DNS domains are present. The DNS server/s for this connection may not be used. For more information please see:
https://www.sparklabs.com/support/kb/ar ... e-present/
Server - 192.168.62.1:53; Lookup Type - Any; Domains - localdomain.
Feb 01 10:42:09 AM: State changed to Connected
-----------------------------------------------