Skip to content
Not Getting DNS Servers
Got a problem with Viscosity or need help? Ask here!
- Posts: 2
- Joined: Tue Jun 02, 2020 5:51 am
aving an issue with OpenVPN/Viscosity not sending DNS server information to clients. Able to connect and everything works minus DNS resolution. It defaults to a 127.56.49.53 (loopback) address which is not configured anywhere. I am using Viscosity 1.8.5.1 as a client. The local DNS server is fully reachable to IP address. The clients are Windows 10. Tried various different setups with DNS, following guides from PFSense and Viscosity. Using the default DNS forwarder, DNS servers local and 8.8.8.8 configured under General, and tried specifiying DNS servers in OpenVPN. Regardless the only DNS server that gets assigned over VPN is a looback of 127.56.49.53.
Hi tonydotigr,
127.56.49.53 is used by Viscosity to forward requests to Viscosity's inbuilt DNS resolver, this is normal behaviour for Viscosity.
First, please check the log, this will tell you how DNS is setup, what mode you're in, and if there are any warnings or errors - https://sparklabs.com/support/kb/articl ... envpn-log/
Regards,
Eric
127.56.49.53 is used by Viscosity to forward requests to Viscosity's inbuilt DNS resolver, this is normal behaviour for Viscosity.
First, please check the log, this will tell you how DNS is setup, what mode you're in, and if there are any warnings or errors - https://sparklabs.com/support/kb/articl ... envpn-log/
Regards,
Eric
Eric Thorpe
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
- Posts: 2
- Joined: Tue Jun 02, 2020 5:51 am
Tue Jun 02, 2020 10:55 amEric wrote: Hi tonydotigr,Thanks this was helpful. I ended up resolving the issue. Only used the local Windows DNS server for the OpenVPN configuration. Viscosity setups up this loopback to internally handle the DNS itself.
127.56.49.53 is used by Viscosity to forward requests to Viscosity's inbuilt DNS resolver, this is normal behaviour for Viscosity.
First, please check the log, this will tell you how DNS is setup, what mode you're in, and if there are any warnings or errors - https://sparklabs.com/support/kb/articl ... envpn-log/
Regards,
Eric
3 posts
Page 1 of 1