[Workaround] No Graph/Statistics (Hyper-V Virtual Switch)
Posted: Thu Oct 03, 2013 6:34 am
The tabs with graph and statistics are not displaying any information after Hyper-V install (needed for Windows Phone emulator). I guess that is the virtual switch that could not be located.
Code: Select all
Oct 02 10:06:55: State changed to Connecting
Oct 02 10:06:55: Viscosity 1.4.6 (1212)
Oct 02 10:06:55: Running on Microsoft Windows 8 Enterprise
Oct 02 10:06:55: Bringing up interface...
Oct 02 10:06:55: Checking reachability status of connection...
Oct 02 10:06:56: Connection is reachable. Starting connection attempt.
Oct 02 10:06:56: OpenVPN 2.3.2 Windows-MSVC [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Jun 18 2013
Oct 2 10:06:57: Control Channel Authentication: using 'ta.key' as a OpenVPN static key file
Oct 2 10:06:57: UDPv4 link local: [undef]
Oct 2 10:06:57: UDPv4 link remote: [AF_INET][HIDDEN]:[HIDDEN]
Oct 2 10:07:02: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Oct 2 10:07:02: [HIDDEN] Peer Connection Initiated with [AF_INET][HIDDEN]
Oct 2 10:07:04: WARNING: potential conflict between --remote address [HIDDEN] and --ifconfig address pair [HIDDEN] -- this is a warning only that is triggered when local/remote addresses exist within the same /24 subnet as --ifconfig endpoints. (silence this warning with --ifconfig-nowarn)
Oct 2 10:07:04: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Oct 2 10:07:04: open_tun, tt->ipv6=0
Oct 2 10:07:04: TAP-WIN32 device [HIDDEN] opened: \\.\Global\{[HIDDEN]}.tap
Oct 2 10:07:04: Set TAP-Windows TUN subnet mode network/local/netmask = [HIDDEN] [SUCCEEDED]
Oct 2 10:07:04: Notified TAP-Windows driver to set a DHCP IP/netmask of [HIDDEN] on interface {[HIDDEN]} [DHCP-serv: [HIDDEN], lease-time: 31536000]Oct 2 10:07:09: ROUTE: route addition failed using CreateIpForwardEntry: The object already exists. [status=5010 if_index=26]
Oct 2 10:07:09: env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
Oct 2 10:07:09: Initialization Sequence Completed
Oct 02 10:07:09: [i]Unable to locate adapter used for this connection.[/i]
Oct 02 10:07:09: State changed to Connected