Viscosity vpn connection issue

Got a problem with Viscosity or need help? Ask here!

backherozzo

Posts: 1
Joined: Sat Apr 20, 2019 5:43 am

Post by backherozzo » Sat Apr 20, 2019 5:57 am
Hi, I installed Viscosity for use my vpn connection in Mac OS X but when I try to connect I receive the following error (same vpn connection work in linux with OpenVPN client for linux):

2019-04-19 21:47:32: Viscosity Mac 1.7.14 (1480)
2019-04-19 21:47:32: Viscosity OpenVPN Engine Started
2019-04-19 21:47:32: Running on macOS 10.14.4
2019-04-19 21:47:32: ---------
2019-04-19 21:47:32: State changed to Connecting
2019-04-19 21:47:32: Checking reachability status of connection...
2019-04-19 21:47:32: Connection is reachable. Starting connection attempt.
2019-04-19 21:47:32: Options error: The command "XXXX" or one of its parameters is invalid for this version of OpenVPN (2.4.6). Please edit the connection, make sure the command is valid, and try again.
2019-04-19 21:47:32: Full command: test
2019-04-19 21:47:33: The OpenVPN subsystem could not be started.
2019-04-19 21:47:33: State changed to Disconnected

James

User avatar
Posts: 2313
Joined: Thu Sep 04, 2008 9:27 pm

Post by James » Mon Apr 22, 2019 6:49 pm
Hi backherozzo,

The following lines in your log indicates that there is an invalid command in your connection:
Code: Select all
2019-04-19 21:47:32: Options error: The command "XXXX" or one of its parameters is invalid for this version of OpenVPN (2.4.6). Please edit the connection, make sure the command is valid, and try again.
2019-04-19 21:47:32: Full command: test 
To resolve the error you can edit the advanced commands section for your connection and remove the invalid command listed in the log messages, and then try connecting again. For information on how to edit advanced commands please see:
https://www.sparklabs.com/support/kb/article/advanced-configuration-commands/#specifying-advanced-configuration-commands

Cheers,
James
Web: https://www.sparklabs.com
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
2 posts Page 1 of 1