Config on the command line

Got a problem with Viscosity or need help? Ask here!

sudoSamurai

Posts: 1
Joined: Tue Dec 12, 2017 3:26 pm

Post by sudoSamurai » Tue Dec 12, 2017 4:11 pm
Hi,

I'm trying to configure the inactivity timeout via the command line on the mac client.

I have tried using the defaults command, and it successfully puts in the values that I want (IdleTime = 60; and DisconnectOnIdle = 1) but the GUI of viscosity never shows the changes. If I go into the GUI and check the box and set the idle timeout, it changes in the plist file and works. For some reason, when I make the changes to the plist file with defaults, it doesn't actually do anything. I've tried killing the process and restarting it, but viscosity doesn't pick up the changes.

Any ideas?

James

User avatar
Posts: 1898
Joined: Thu Sep 04, 2008 9:27 pm

Post by James » Thu Dec 14, 2017 6:02 pm
Hi sudoSamurai,

Using the "defaults" command is the correct method, for example something like "defaults write com.viscosityvpn.Viscosity IdleTime -int 20". This should be reflected immediately in the GUI if you close and re-open Viscosity's Preferences window, but I'd recommend quitting and re-launching Viscosity to ensure it has actually been applied and being used correctly.

Editing the plist file directly will not work due to the way macOS caches preferences data (it's necessary to log out and log back into the computer to force macOS to re-read the plist data).

Cheers,
James
James Bekkema
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
2 posts Page 1 of 1