Machines connect and disconnect in about 3 seconds...

Got a problem with Viscosity or need help? Ask here!

jdlance

Posts: 2
Joined: Fri Apr 08, 2016 8:14 am

Post by jdlance » Fri Apr 08, 2016 8:20 am
Hello:

The following is a session log. I have at least two machines doing this and one other that doesn't do this. The one that is behaving is a Windows 10 machine but this morning it was doing this also!

The Win10 machine was doing it from my house network.
This exact box is hard wired to our network here at the office and the third one is connected via WiFi to another company's network.

The machines will connect, stay on for about 1 to 3 seconds and switch to Disconnected state.

Any thoughts are most welcome!
Thank you,
Jeff

Apr 07 5:12:09 PM: State changed to Connecting
Apr 07 5:12:09 PM: Viscosity Windows 1.6.2 (1434)
Apr 07 5:12:09 PM: Running on Microsoft Windows 7 Ultimate
Apr 07 5:12:09 PM: Bringing up interface...
Apr 07 5:12:10 PM: Checking reachability status of connection...
Apr 07 5:12:10 PM: Connection is reachable. Starting connection attempt.
Apr 07 5:12:10 PM: OpenVPN 2.3.10 Windows-MSVC [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Mar 2 2016
Apr 07 5:12:10 PM: library versions: OpenSSL 1.0.2g 1 Mar 2016, LZO 2.09
Apr 07 5:12:20 PM: Control Channel Authentication: using 'C:\Program Files\Common Files\Viscosity\OpenVPNConfig\JLance\1\ta.key' as a OpenVPN static key file
Apr 07 5:12:20 PM: UDPv4 link local: [undef]
Apr 07 5:12:20 PM: UDPv4 link remote: [AF_INET]172.17.0.201:1194
Apr 07 5:12:20 PM: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Apr 07 5:12:20 PM: [OpenVPN Server] Peer Connection Initiated with [AF_INET]172.17.0.201:1194
Apr 07 5:12:25 PM: Option 'explicit-exit-notify' in [PUSH-OPTIONS]:1 is ignored by previous <connection> blocks
Apr 07 5:12:25 PM: Options error: --dhcp-option DNS: maximum of 4 DNS servers can be specified
Apr 07 5:12:25 PM: Options error: --dhcp-option DNS: maximum of 4 DNS servers can be specified
Apr 07 5:12:25 PM: Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:24: block-ipv6 (2.3.10)
Apr 07 5:12:25 PM: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Apr 07 5:12:25 PM: open_tun, tt->ipv6=0
Apr 07 5:12:25 PM: TAP-WIN32 device [[email protected]] opened: \\.\Global\{06F7D7D0-42DD-4692-B30B-2EEED570F7D7}.tap
Apr 07 5:12:25 PM: Set TAP-Windows TUN subnet mode network/local/netmask = 172.27.236.0/172.27.236.16/255.255.252.0 [SUCCEEDED]
Apr 07 5:12:25 PM: Notified TAP-Windows driver to set a DHCP IP/netmask of 172.27.236.16/255.255.252.0 on interface {06F7D7D0-42DD-4692-B30B-2EEED570F7D7} [DHCP-serv: 172.27.239.254, lease-time: 31536000]
Apr 07 5:12:25 PM: Successful ARP Flush on interface [29] {06F7D7D0-42DD-4692-B30B-2EEED570F7D7}
Apr 07 5:12:25 PM: NOTE: Release of DHCP-assigned IP address lease on TAP-Windows adapter failed: An address has not yet been associated with the network endpoint. (code=1228)
Apr 07 5:12:30 PM: Initialization Sequence Completed
Apr 07 5:12:31 PM: DNS set to Split, report follows:
Server - 172.17.0.12:53; Lookup Type - Split; Domains - commercial.lpc.local.
Server - 172.17.0.35:53; Lookup Type - Split; Domains - commercial.lpc.local.
Server - 208.115.254.242:53; Lookup Type - Split; Domains - commercial.lpc.local.
Server - 208.115.254.250:53; Lookup Type - Split; Domains - commercial.lpc.local.
Server - 172.17.0.95:53; Lookup Type - Any; Domains - commercial.lpc.local.
Server - 172.17.0.174:53; Lookup Type - Any; Domains - commercial.lpc.local.

Apr 07 5:12:31 PM: State changed to Connected
Apr 07 5:12:33 PM: State changed to Disconnecting
Apr 07 5:12:33 PM: State changed to Disconnected
Apr 07 5:12:33 PM: Reachability check failed for 172.17.0.201 - Reachability Check Timed Out

Eric

User avatar
Posts: 1146
Joined: Sun Jan 03, 2010 3:27 am

Post by Eric » Fri Apr 08, 2016 5:21 pm
Hi Jeff,

There is a fix for this issue in the current Viscosity beta. To get the beta, go to Preferences -> General, tick Include Beta updates then click Check Now. Let us know how you go.

Regards,
Eric
Eric Thorpe
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs

donv

Posts: 1
Joined: Sun Apr 10, 2016 2:30 am

Post by donv » Sun Apr 10, 2016 5:10 am
Had the same disconnect problem in Windows 7 using release 1.6.2, and the beta fixed it. Experienced no disconnects in OS X 10.11.4 using release 1.6.2.
3 posts Page 1 of 1