Can not access distant LAN
Posted: Tue Feb 12, 2019 7:33 am
Hello,
I am connecting to a distant network running OpenVPN server on PfSense. I used the export setting option on PfSense to generate a config file and thought connecting would be easy. Well I can connect but I can not see anything on the local LAN except the PfSense machine.
Connection log looks good
- Scott
I am connecting to a distant network running OpenVPN server on PfSense. I used the export setting option on PfSense to generate a config file and thought connecting would be easy. Well I can connect but I can not see anything on the local LAN except the PfSense machine.
Connection log looks good
Code: Select all
But ifconfig is confusing2019-02-11 21:17:01: Viscosity Mac 1.7.14 (1480)
2019-02-11 21:17:01: Viscosity OpenVPN Engine Started
2019-02-11 21:17:01: Running on macOS 10.13.6
2019-02-11 21:17:01: ---------
2019-02-11 21:17:01: State changed to Connecting
2019-02-11 21:17:01: Checking reachability status of connection...
2019-02-11 21:17:01: Connection is reachable. Starting connection attempt.
2019-02-11 21:17:01: OpenVPN 2.4.6 x86_64-apple-darwin [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [MH/RECVDA] [AEAD] built on Nov 23 2018
2019-02-11 21:17:01: library versions: OpenSSL 1.0.2q 20 Nov 2018, LZO 2.10
2019-02-11 21:17:02: TCP/UDP: Preserving recently used remote address: [AF_INET]78.193.76.237:1194
2019-02-11 21:17:02: UDP link local (bound): [AF_INET][undef]:1194
2019-02-11 21:17:02: UDP link remote: [AF_INET]78.193.76.237:1194
2019-02-11 21:17:02: State changed to Authenticating
2019-02-11 21:17:02: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
2019-02-11 21:17:03: [OpenVPN CA] Peer Connection Initiated with [AF_INET]78.193.76.237:1194
2019-02-11 21:17:04: Opened utun device utun10
2019-02-11 21:17:04: do_ifconfig, tt->did_ifconfig_ipv6_setup=0
2019-02-11 21:17:04: /sbin/ifconfig utun10 delete
2019-02-11 21:17:04: NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure
2019-02-11 21:17:04: /sbin/ifconfig utun10 192.168.5.2 192.168.5.2 netmask 255.255.255.0 mtu 1500 up
2019-02-11 21:17:04: Initialization Sequence Completed
2019-02-11 21:17:04: DNS mode set to Split
2019-02-11 21:17:04: WARNING: Split DNS is being used however no DNS domains are present. The DNS server/s for this connection may not be used. For more information please see: https://www.sparklabs.com/support/kb/article/warning-split-dns-is-being-used-however-no-dns-domains-are-present/
2019-02-11 21:17:04: State changed to Connected
Code: Select all
I must be doing something stupid. Any ideas or obvious errors ? Thanks for any help !lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
XHC20: flags=0<> mtu 0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
ether ac:87:a3:0b:31:cb
inet6 fe80::1c49:cdd6:3637:93cc%en0 prefixlen 64 secured scopeid 0x5
inet 192.168.0.10 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect (1000baseT <full-duplex>)
status: active
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 88:63:df:cc:9f:d9
inet6 fe80::1044:2f42:6634:e2fc%en1 prefixlen 64 secured scopeid 0x6
inet 192.168.0.20 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
ether 0a:63:df:cc:9f:d9
media: autoselect
status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
ether 0a:ca:c9:0e:4d:e5
inet6 fe80::8ca:c9ff:fe0e:4de5%awdl0 prefixlen 64 scopeid 0x8
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 0a:00:00:3e:da:70
media: autoselect <full-duplex>
status: inactive
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 0a:00:00:3e:da:71
media: autoselect <full-duplex>
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 0a:00:00:3e:da:70
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x2
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 9 priority 0 path cost 0
member: en3 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 10 priority 0 path cost 0
nd6 options=201<PERFORMNUD,DAD>
media: <unknown type>
status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::c6e8:4ac:d89c:e1c9%utun0 prefixlen 64 scopeid 0xc
nd6 options=201<PERFORMNUD,DAD>
utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::5291:d8fb:8a48:b96%utun1 prefixlen 64 scopeid 0xd
nd6 options=201<PERFORMNUD,DAD>
utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::43f3:e38:f121:c36a%utun2 prefixlen 64 scopeid 0xe
nd6 options=201<PERFORMNUD,DAD>
utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::7570:4767:da6b:68cd%utun3 prefixlen 64 scopeid 0xf
nd6 options=201<PERFORMNUD,DAD>
utun4: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::6c19:d56a:3d19:e49f%utun4 prefixlen 64 scopeid 0x10
nd6 options=201<PERFORMNUD,DAD>
utun10: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet 192.168.5.2 --> 192.168.5.2 netmask 0xffffff00
- Scott