Problems with DND after last update
Posted: Wed Apr 25, 2018 3:08 am
Hello,
I have problem with DNS after last viscosity update. Here is the log:
Opening utun (connect(AF_SYS_CONTROL)): Resource busy
Im using viscosity from really long time and didn't have such problem
I have problem with DNS after last viscosity update. Here is the log:
Code: Select all
I have hidden IP. I see 3 interesting entries:2018-04-24 20:56:39: Viscosity Mac 1.7.7 (1431)
2018-04-24 20:56:39: Viscosity OpenVPN Engine Started
2018-04-24 20:56:39: Running on macOS 10.13.4
2018-04-24 20:56:39: ---------
2018-04-24 20:56:39: State changed to Connecting
2018-04-24 20:56:39: Checking reachability status of connection...
2018-04-24 20:56:39: Connection is reachable. Starting connection attempt.
2018-04-24 20:56:39: OpenVPN 2.3.18 x86_64-apple-darwin [SSL (OpenSSL)] [LZO] [PKCS11] [MH] [IPv6] built on Dec 20 2017
2018-04-24 20:56:39: library versions: OpenSSL 1.0.2n 7 Dec 2017, LZO 2.10
2018-04-24 20:56:39: Control Channel Authentication: using '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/connection.3msfV9/ta.key' as a OpenVPN static key file
2018-04-24 20:56:39: Attempting to establish TCP connection with [AF_INET]xxx:80 [nonblock]
2018-04-24 20:56:41: TCP connection established with [AF_INET]xxx:80
2018-04-24 20:56:41: TCPv4_CLIENT link local (bound): [undef]
2018-04-24 20:56:41: TCPv4_CLIENT link remote: [AF_INET]xxx:80
2018-04-24 20:56:41: State changed to Authenticating
2018-04-24 20:56:41: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
2018-04-24 20:56:46: [consolvpn] Peer Connection Initiated with [AF_INET]94.56.73.196:80
2018-04-24 20:56:50: Options error: Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:16: block-outside-dns (2.3.18)
2018-04-24 20:56:50: Opening utun (connect(AF_SYS_CONTROL)): Resource busy
2018-04-24 20:56:50: Opening utun (connect(AF_SYS_CONTROL)): Resource busy
2018-04-24 20:56:50: Opening utun (connect(AF_SYS_CONTROL)): Resource busy
2018-04-24 20:56:50: Opened utun device utun3
2018-04-24 20:56:50: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
2018-04-24 20:56:50: /sbin/ifconfig utun3 delete
2018-04-24 20:56:50: NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure
2018-04-24 20:56:50: /sbin/ifconfig utun3 10.15.110.10 10.15.110.9 mtu 1500 netmask 255.255.255.255 up
2018-04-24 20:56:50: Initialization Sequence Completed
2018-04-24 20:56:50: DNS mode set to Full
2018-04-24 20:56:51: State changed to Connected
Opening utun (connect(AF_SYS_CONTROL)): Resource busy
Im using viscosity from really long time and didn't have such problem