Connection error

Got a problem with Viscosity or need help? Ask here!

trundstrom

Posts: 1
Joined: Thu Nov 13, 2008 1:37 am

Post by trundstrom » Thu Nov 13, 2008 1:41 am
Hello,

Thanks for a wonderful product, works very well for most of our users. But I recently had a problem with one of the users running on Leopard. This user can't connect properly, it just get stuck in "connecting" state. Another user on the same network with the same config but running Tiger have no problems at all.

The following information is collected from the log when setting "verb 15" in the advanced section:
Code: Select all
Wed Nov 12 13:45:20 2008: MANAGEMENT: CMD 'state on'
Wed Nov 12 13:45:20 2008: MANAGEMENT: CMD 'hold release'
Wed Nov 12 13:45:20 2008: MANAGEMENT: CMD 'hold release'
Wed Nov 12 13:45:20 2008: IMPORTANT: OpenVPN's default port number is now 1194
Wed Nov 12 13:45:20 2008: SE_INIT maxevents=4 flags=0x00000002
Wed Nov 12 13:45:20 2008: SE_RESET
Wed Nov 12 13:45:20 2008: SE_CTL rwflags=0x0001 ev=5 fast=1 cap=1024 maxfd=-1 arg=0x00000000
Wed Nov 12 13:45:20 2008: SE_WAIT_FAST maxfd=5 tv=1/0
Wed Nov 12 13:45:20 2008: SE_WAIT[5
Wed Nov 12 13:45:20 2008: MANAGEMENT: CMD 'password [...]'
Wed Nov 12 13:45:20 2008: MANAGEMENT: CMD '"'
Wed Nov 12 13:45:20 2008: SE_RESET
Wed Nov 12 13:45:20 2008: SE_CTL rwflags=0x0001 ev=5 fast=1 cap=1024 maxfd=-1 arg=0x00000000
Wed Nov 12 13:45:20 2008: SE_WAIT_FAST maxfd=5 tv=1/0
Wed Nov 12 13:45:21 2008: SE_RESET
Wed Nov 12 13:45:21 2008: SE_CTL rwflags=0x0001 ev=5 fast=1 cap=1024 maxfd=-1 arg=0x00000000
Wed Nov 12 13:45:21 2008: SE_WAIT_FAST maxfd=5 tv=1/0
Any help will be greatly appreciated.

James

User avatar
Posts: 2313
Joined: Thu Sep 04, 2008 9:27 pm

Post by James » Thu Nov 13, 2008 5:22 pm
Hi trundstrom,

Is the user being prompted for a password?

Would you be able to send a copy of your config file (feel free to censor out any addresses etc) to [email protected] ?

Cheers
James
Web: https://www.sparklabs.com
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
2 posts Page 1 of 1