Search found 12 matches

Search found 12 matches Page 1 of 2
by danielmanser
Wed Aug 30, 2017 6:17 pm
Forum: Viscosity Feedback
Topic: Feature Request: Display certificate expiration date
Replies: 4
Views: 13643

We use Viscosity with x509 certificates. The enduser installs their configuration via a Viscosity bundle. They sometimes have multiple configurations/certificates for various devices and mess around with them, and there doesn't seem to be an option to view the expiration date or serial of the certif...
by danielmanser
Wed May 18, 2016 4:26 pm
Forum: Viscosity Support (Mac Version)
Topic: OS X 10.10.5: IPv6 default route on Wifi doesn't disappear
Replies: 7
Views: 2881

Tested with openvpn 2.3.10 from Homebrew; this works as expected. Is Viscosity adding a static IPv6 route?
by danielmanser
Wed May 18, 2016 1:14 am
Forum: Viscosity Support (Mac Version)
Topic: OS X 10.10.5: IPv6 default route on Wifi doesn't disappear
Replies: 7
Views: 2881

We've done some more testing. When Viscosity connects, it sets the Wifi route to static ("S" flag). When disconnecting the VPN and also shutting down the Wifi interface, the static route remains (which is bad). My guess is that as long as there is a static route, OS X does not configure another defa...
by danielmanser
Tue May 17, 2016 9:09 pm
Forum: Viscosity Support (Mac Version)
Topic: OS X 10.10.5: IPv6 default route on Wifi doesn't disappear
Replies: 7
Views: 2881

Unfortunately, the problem persists even with 10.11. Steps to reproduce: 1. Ethernet connected (en3), WiFi connected (en0) with no VPN connection Routing table: Internet6: Destination Gateway Flags Netif Expire default fe80::209:fff:fe09:b07%en3 UGc en3 default fe80::219:7ff:feeb:f80%en0 UGcI en0 ::...
by danielmanser
Wed May 04, 2016 3:49 pm
Forum: Viscosity Support (Mac Version)
Topic: OS X 10.10.5: IPv6 default route on Wifi doesn't disappear
Replies: 7
Views: 2881

Unfortunately, ticking the "Reset network interfaces on disconnect" option didn't work. I suspect it is a OS X issue.
by danielmanser
Tue May 03, 2016 4:59 pm
Forum: Viscosity Support (Mac Version)
Topic: OS X 10.10.5: IPv6 default route on Wifi doesn't disappear
Replies: 7
Views: 2881

Hi James

Yes, the server is pushing the IPv6 route 2000::/3. I'll test the setting and report back if it solves the issue.

Daniel
by danielmanser
Fri Apr 29, 2016 6:45 pm
Forum: Viscosity Support (Mac Version)
Topic: OS X 10.10.5: IPv6 default route on Wifi doesn't disappear
Replies: 7
Views: 2881

We ran into an issue lately where Mac OS X 10.10.5 clients lost IPv6 connectivity after a Viscosity disconnect. Further testing revealed that a default route didn't get removed. Steps to reproduce: 1. Client with Mac OS X 10.10.5 (10.9 and 10.11 seem to be fine), no Ethernet plugged in 2. Connect to...
by danielmanser
Sat Nov 07, 2015 4:52 am
Forum: Viscosity Support (Mac Version)
Topic: Force DNS resolution prior to connection
Replies: 2
Views: 2771

Thanks for your response, James. I didn't notice we have set persist-remote on the clients...
by danielmanser
Thu Nov 05, 2015 6:38 pm
Forum: Viscosity Support (Mac Version)
Topic: Force DNS resolution prior to connection
Replies: 2
Views: 2771

I run two OpenVPN servers which both are in different IP subnets. I do basic DNS load balancing so users connect to both servers evenly. This is accomplished by returning two DNS A records with 60 seconds TTL. When one server is put into maintenance mode, I simply remove the server's IP address from...
by danielmanser
Fri Apr 24, 2015 5:34 pm
Forum: Viscosity Support (Mac Version)
Topic: Strange error (Too many wakeups)
Replies: 1
Views: 2565

A user has a strange issue on his Mac OS X Yosemite machine where in the logs I found these strange entries: Mar 23 21:55:24 gufi.local com.sparklabs.ViscosityHelper[1470]: ViscosityHelper started Mar 23 21:55:45 gufi kernel[0]: hfs: mounted Viscosity on device disk4s1 Mar 23 21:55:47 gufi kernel[0]...
Search found 12 matches Page 1 of 2